LK-6828 vacuum suction plastic
Type: synthetic polyurethane emulsion
Application: suitable for the heat absorption and adhesion between the medium board or other wood products and PVC leather, and can be widely used in the high end PVC plastic molding of the sound box, cabinet, relief door, computer table, office platform, decoration line and so on.
Product features:
Germany imported waterborne polyurethane material has higher adhesion strength.
It has good weatherability and high temperature and low temperature resistance.
Safety, environmental protection, no toxic substances and ozone layer substances are in line with Rhos standard.
No need to add curing agent, after heating activation, it has high adhesion strength.
Physical properties:
Appearance: milk white liquid
Brucell viscosity: 1100 + 100cps@25 C
Solid content: 45 + 2%
PH: 6-8
Operating conditions:
This adhesive can be applied to different vacuum sucking equipment.
Requirements: thermal activation temperature more than 52 DEG C
Matters needing attention：
Do not mix with other adhesives.
Do not put it in a direct sunlight or wet environment, or expose it to the air for a long time.
Product packaging: 20 kg, /25 kg, /30 kg, plastic barrel.
Shelf life: unopened original packaging, in the usual dry and cool condition, is guaranteed for six months from the date of production.
